Casio SE-G1 User Manual

E-10
To Program basic settings
This section describes the fundamental programming for basic operations.
To issue receipts
Instead of recording on journal paper, you can issue receipts.
1 Remove the printer cover by lifting up.
2 Lift the take up reel and cut the paper.
3 Replace the printer cover.
4 Turn the Mode switch to PGM position.
“P” appears on the display.
5 Press Zk to set the cash register in program mode.
6 Press Zu to set the register in “Receipt” mode.
Now your cash register issues receipts.
If you wish to restore the register to “Journal” mode, press ?u in step 6.
Mode Switch
To use the cash register’s basic function

Casio SE-G1 Specifications

General

Clerk lock	Yes
Memory type	Flash ROM
Number of users	8 user(s)
Keyboard number of keys	34
Supported paper width	58 mm
Backlight	No
Display digits	8 digits
Display number of lines	1 lines
Second display number of characters	8
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Power source	AC
Power consumption	100 mA

Weight and Dimensions

Depth	345 mm
Width	326 mm
Height	167 mm
Weight	3500 g