Casio SE-G1 User Manual

E-14
To use the cash register’s basic function
To set exchange rate
By setting the exchange rate, the register performs conversion
calculations between the local currency and Euro.
Step
Operation
1 Enter Z then press k key to set the regis-
ter in the program mode.
Zk
2 Enter the exchange rate against Euro then
press ] key. The example on the right is for
setting DM 1.95 against 1 Euro.
Z">B]
3 Press k key to complete the program.
k
To set the register to accept Euro only
By the following program, the register is set to accept only Euro cur-
rency.
Step Operation
1 Turn the Mode switch to Z position.
2 Issue all the reset report by pressing p
key. See “Daily read/reset report” on page
E-28 for reset report.
p
3 Press Z?p to clear the periodical
report. See “To obtain periodic reports” on
page E-30 for periodical report.
Z?p
4 Enter ?Z?MX??X then
press k key. “010172002” is the special
program code for restricting transactions to
Euro only.
?Z?MX??X
k
5 Press p to complete the program.
p
Mode Switch
Mode Switch

Casio SE-G1 Specifications

General

Clerk lock	Yes
Memory type	Flash ROM
Number of users	8 user(s)
Keyboard number of keys	34
Supported paper width	58 mm
Backlight	No
Display digits	8 digits
Display number of lines	1 lines
Second display number of characters	8
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Power source	AC
Power consumption	100 mA

Weight and Dimensions

Depth	345 mm
Width	326 mm
Height	167 mm
Weight	3500 g