79
E
PART 6
Data Communications
Data communications capabilities let you transfer data between two CASIO SF
Units, or between this unit and a personal computer. You can perform such
operations in the Telephone Directory, Memo, Schedule Keeper, Calendar, To
Do, Expense or Anniversary modes.
Data communication is supported with the following SF Unit models.
SF-4990, SF-6990, SF-7990.
Data transfer to other SF Units is possible by connecting to computer running
FA-127 Version 1.5 software.
Setting Up for Data Communications
The following describes what you should do to set up for data communications
between two SF Units, or between this unit and a personal computer.
To connect the SF-4990/SF-6990/SF-7990 to another SF Unit
1. Make sure that the power of both units is switched off.
2. Open the covers of the data communication jacks of the two SF Units.
3. Connect the two units using the optional SB-63 cable.
• The 3-pin plug of the SB-63 cable is a two-step type. When attaching the plug,
be sure to push it firmly into the jacks as far as it will go.
To Next Page
Loading...
Need help?
General
