87
E
Sending Data
To send all Schedule Keeper, Calendar or Expense Mode data
in a specific period
1. In the Schedule Keeper, Calendar or Expense Mode, press FUNCTION once
or twice to display the function menu.
• You can perform the following operation while in the open memory area or
the secret memory area.
2. Press the applicable number key to select DATA COMM.
3. Press
1 to select SEND.
4. Press
1 to select MODE DATA.
SEND DATA?
FROM 1901/01/01
TO 2002/01/01
ENTER/ESC
5. Using the H and J keys to move the cursor, input the starting and ending
date of the period.
• To send the data from January 1, 2004 to April 1, 2004, for example, press
J to move the cursor under the month (2004/0
1/01) and press 4.
6. After you specify the ending date, press
ENTER.
Press
ENTER to start the send operation or ESC to abort the operation without
sending anything.
• To abort the send operation at any time, press
ESC.
• If an error occurs during the send operation, the message “TRANSMIT
ERROR!” appears on the display. Press
ESC to clear the error message.
7. After the send operation is complete, the display returns to the Schedule
Keeper, Calendar or Expense Mode screen.
To Next Page
Loading...
Need help?
General
