Casio SF-4990 User Manual

PART 6 Data Communications
E
82
To set up the SF Unit to receive data
1. While an initial screen is displayed, press FUNCTION once or twice to display
the function menu.
• If you want the received data to be stored in the secret memory area, you
should also enter the secret memory area at this point. If you are in the open
memory area on the receiving unit, received data is stored into the open
memory area.
2. Press the applicable number key to select DATA COMM.
3. Press
2 to select RECEIVE.
RECEIVE OK
TO STOP PRESS ESC
• This message indicates that the receive unit is standing by for data. Perform
the required procedures to start sending data from another SF Unit, or a
personal computer (see the Interface Unit manual for details).
• To abort the receive operation at any time, press
ESC.
• This procedure is the same regardless of whether the data is received from
another SF Unit, or from a personal computer.
4. The display changes to the following once the SF Unit starts receiving data.
Receive data
item count
RECEIVING
ITEM NO
16
TO STOP PRESS ESC

Casio SF-4990 Specifications

General

Brand	Casio
Model	SF-4990
Category	Organizer
Language	English