E-72
To assign a cashier
If cashier assignment system is programmed, you can obtain sales data of each
cashier on X or Z reports. Up to eight cashiers can be assigned. When the mode
switch is turned OFF, the assigned cashier’s ID number will be cleared. See “To
set general controls” on page E-43 for programming cashier assignment system.
Step Operation
1 In any Mode switch other than PGM, CAL or OFF, sign on by enter-
ing cashier’s ID number then press :.
Z
to
<:
2 Perform regular operations.
3 When the cashier signs o, enter “0” then press :.
?:
Advanced programmings and registrations