Music Presets
E-57
You can modify the preset chord progression and save it as a
user preset, or you can create a new chord progression from
scratch and save it.
1.
Perform steps 1 through 4 under “To perform
using a music preset” (page E-49) and select
the music preset you want to edit in order to
create your user music preset.
2.
Configure tone and other settings referring to
“Music Preset Settings” (page E-51).
3.
While holding down the R-13 (FUNCTION)
button, press the C-13 (MENU) button.
• This displays the MP (music preset) editor screen like
the one shown below with the 0 next to “Chord Edit”.
4.
Press the R-16 (ENTER) button.
• This displays the chord editor screen shown below. You
can use this screen to directly edit the individual chord
data items of a chord progression.
5.
Perform the following chord progression
editing operations.
• Change an existing chord (“To modify recorded chord
data”, page E-58)
• Delete an existing chord (“To delete recorded chord
data”, page E-58)
• Insert a new chord (“To insert a new chord”, page E-58)
• Delete all existing chords (“Initialize”, under “To perform
menu operations”, page E-60)
• Input a series of chords (“To perform step input of
chords”, page E-59)
• Key shift all existing chords (“Key Shift”, under “To
perform menu operations”, page E-60)
• Insert another music preset chord progression following
the chord progression data of the preset being edited
(“AppendChord”, under “To perform menu operations”,
page E-60)
• Delete existing chords in a specific measure (“Delete
Measure”, under “To perform menu operations”, page
E-60)
• Insert blank measures at a specific location (“Insert
Measure”, under “To perform menu operations”, page
E-60)
6.
After editing is complete, press the R-15 (EXIT)
button.
• This returns to the MP editor screen.
7.
Perform steps 4 through 9 under “To create and
save a user preset” on page E-53.
• Steps 4 and 5 can be skipped if they are not necessary.
Editing a Chord Progression
Chord Progression Editing Flow
Data being edited
Cursor
Data type name at
cursor position
Data before and after data being edited
To Next Page
Loading...
Need help?
General
Weight and Dimensions
