Using MOMENT SETTER
MOMENT SETTER lets you configure the watch to display specific
information in accordance with timing specified by you. MOMENT SETTER
is designed mainly to be used while an Activity app measurement operation
is in progress. For example, you can use MOMENT SETTER as described
below.
●
During a trekking Activity app operation. Three hours before sunset, the
watch automatically displays the upcoming sunset time.
●
During
a
fishing Activity app operation. One hour before an optimum fishing
period starts, the watch automatically displays the time period.
●
During a
cycling Activity app operation. Stopping causes the watch screen
to display the distance travelled thus far automatically.
You can configure each MOMENT SETTER with conditions and alert content
settings, such as “When stopped, display the distance travelled thus far.
”
These settings are divided among four categories: “Climbing, trekking”;
“Fishing”; “Cycling”; “Extras”. Select checkboxes (
) as shown on the
sample screen to turn on each MOMENT SETTER for the activity you are
about to perform.
・
・
・
MOMENT SETTER
MOMENT SETTER
MOMENT SETTER
Category name
EN-99
To Next Page
Loading...
Need help?
General
