Monochrome LCD Screen
Your watch has a dual-layer color and monochrome LCD. Switching between
monochrome and color LCD screens can be performed manually, but it is
also performed
automatically in certain cases. The following section explains
when the watch displays the monochrome LCD screen.
After entering the Timepiece Mode
The watch will use the monochrome LCD screen to display the current time
after you
enter the Timepiece Mode by running the Timepiece app (see “Using
the Timepiece App”).
Display Operations
●
The operations described below
can be performed in the
Timepiece Mode.
Pressing (and immediately
releasing) the power button:
Turns on the backlight.
Holding down the power button:
Exits the Timepiece Mode and
starts up Android Wear.
●
The watch does not perform any
notification operations
while in the
Timepiece Mode.
Important!
●
Android Wear operation stops whenever the watch charge level starts to
approach 0%. For a while after that happens, the watch will automatically
switch to the monochrome LCD screen that appears in Timepiece Mode.
The watch’s power button is completely disabled at this time. Charge the
watch as soon as possible when this happens. Android Wear will
automatically resume operation after the charge reaches a certain level.
EN-109
To Next Page
Loading...
Need help?
General
