Casio XJ-F21XN User Manual

78
The MONITOR OUT terminal of the projector outputs the video signal being input via the COMPUTER
IN 1 terminal or COMPUTER IN 2 terminal as-is. This makes it possible to simultaneously output the
projection image to another display.
Note
 The signals output from the MONITOR OUT terminal when the projector is turned on depends
on the selected input source as shown in the table below.
 The projector can be configured to output, from the MONITOR OUT terminal, the video signal
input from the COMPUTER IN 1 terminal while the projector is in the standby state. For details,
see “Option Settings 2 3 Standby RGB/Audio” (page 65).
Using the MONITOR OUT Terminal (XJ-UT Series,
XJ-S400UN, XJ-S400WN)
When this input source is selected:
The video input signal from this terminal is output to the
MONITOR OUT terminal:
Computer1 COMPUTER IN 1
Computer2 COMPUTER IN 2
Video, HDMI1, HDMI2, CASIO USB Tool,
Network
The video input signal is output from either Computer1 or
Computer2, in accordance with the last selected input source
(COMPUTER IN 1 terminal or COMPUTER IN 2 terminal).*
1
*1 For example, even if the input source is switched from Computer1 to Video, the MONITOR
OUT terminal continues output the video input signal from COMPUTER IN 1.

Casio XJ-F21XN Specifications

General

Brand	Casio
Model	XJ-F21XN
Category	Projector
Language	English