Casio XJ-UT Series User Manual

70
Troubleshooting
The color and on/off/flashing status of the indicators let you know the current operational status of the
projector. The table below shows what the indicators look like when operation is normal.
Note
 The POWER/STANDBY indicator will flash green if the projector is turned on but the projection
light has been turned off by Auto Projection Off (page 47).
Normal Operation Indicators
■ : Lit ★ : Flashing
When the indicators appear like this:
It means this:
XJ-UT Series
XJ-F Series
XJ-S Series
POWER/
STANDBY
LIGHT TEMP
POWER/
STANDBY
STATUS
The projector has just been plugged into a power
outlet. Wait until the projector enters the standby state
(see below) before trying to turn on power.
■■■■■
Red Amber Amber Amber Amber
■■
Standby state: The AC power cord is plugged in and
the projector is in standby.
Red Red
XJ-UT312WN/XJ-UT352WN
XJ-F21XN/XJ-F211WN/
XJ-S400UN/XJ-S400WN
Projector is warming up after being turned on.
★■■★■
Green Amber Amber Green Amber
XJ-UT352W
XJ-F11X/XJ-F101W/
XJ-S400U/XJ-S400W
★■ ★■
Green Green Green Green
■■ ■■
Projector is on and standing by for use.
“On” is selected for the projector’s “Light Control”
setting.
Green Green Green Green
■■
Projector is on and standing by for use.
“Off” is selected for the projector’s “Light Control”
setting.
Green Green
★ 3 ■■ ■★ 3 ■■
Projector is performing an internal process to prepare
for network system startup (network models only).
Green Amber Amber Green Amber
★★
Projector is performing internal power down processes.
Red Red

Casio XJ-UT Series Specifications

General

Brand	Casio
Model	XJ-UT Series
Category	Projector
Language	English