14
Operating the Projector
Unless specifically noted otherwise, the operations in this section are performed using the remote
controller. If both the projector and the remote controller have the same key, either one can be used to
perform the corresponding operation.
The tables below show the input sources that can be selected for each projector model.
XJ-V Series
XJ-F Series
* Network models only
Selecting the Input Source (INPUT)
Input Source Name Output Projection Image (and Audio)
Computer
(RGB or Component)
Images and audio from a computer or video device connected to the projector’s
COMPUTER terminal and AUDIO IN terminal.
HDMI Images and audio from a computer or video device connected to the projector’s
HDMI terminal.
Input Source Name Output Projection Image (and Audio)
Computer
(RGB or Component)
Images and audio from a computer or video device connected to the projector’s
COMPUTER terminal and AUDIO IN terminal.
S-Video Images and audio from a video device connected to the projector’s S-VIDEO terminal
and AUDIO IN R/L terminals.
Video Images and audio from a video device connected to the projector’s VIDEO terminal
and AUDIO IN R/L terminals.
HDMI1 Images and audio from a computer or video device connected to the projector’s
HDMI 1 terminal.
HDMI2 Images and audio from a computer or video device connected to the projector’s
HDMI 2 terminal.
File Viewer* Images (and audio in the case of a movie file) contained in the following types of files
located in projector internal memory or on a memory device connected to the
projector’s USB-A port: image files, movie files, presentation files, PDF files.
CASIO USB Tool* Screen contents of a CASIO calculator or electronic dictionary connected to the
projector’s USB-A port.
Network* Screen contents and audio of a computer connected to the projector via wireless LAN
or wired LAN.
USB Display* Screen contents and audio of a computer connected to the projector’s USB-B port.
To Next Page
Loading...
Need help?
General
