16
To use manual keystone correction (KEYSTONE)
Use the [KEYSTONE +] and [KEYSTONE –] keys to adjust
keystone correction manually.
The projector has a keystone correction feature that detects
when it is at a vertical angle to the screen and performs
keystone correction automatically. Use the above to make
adjustment manually when auto correction produces results
that are not what you want.
If there is no menu, dialog box, or anything else displayed on the projection screen with an
XJ-F Series projector, you can also use the projector’s [] and [] keys to perform manual
keystone correction.
To zoom an image (D-ZOOM)
1.
Press the [D-ZOOM +] key.
This will enlarge the center of the projected image one step.
2.
To zoom in on the center of the projected image more, press the [D-ZOOM +]
key again. To zoom out, press the [D-ZOOM –] key.
Each press of [D-ZOOM +] zooms in (increases the zoom factor), while [D-ZOOM –] zooms
out. Holding down either key continuously scrolls the zoom factor.
3.
While an image is zoomed, use the [], [], [
], and [
] keys to scroll the view
to other parts of the image.
4.
To exit the zoom operation, press the [ESC] key.
Output Image Operations
To Next Page
Loading...
Need help?
General
Weight and Dimensions
