Casio XJ-V10X User Manual

68
Troubleshooting
The POWER/STANDBY indicator and STATUS indicator change to show the current status of the
projector as described in the tables below.
POWER/STANDBY indicator
STATUS indicator
Note
 The POWER/STANDBY and STATUS indicators both light amber immediately after the
projector is plugged into a power outlet.
Indicators
When the indicator is doing this: It means this about the projector:
Lit red Connected to a power source, but turned off (standby mode)
Flashing green Warming up after being turned on
Lit green Power on, operation normal
Flashing red Internal process in progress immediately after power off
When the indicator is doing this: It means this about the projector:
Lit green “On” selected for the “Light Control” setting
Lit (or flashing) red Error
Lit (or flashing) amber Error

Casio XJ-V10X Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	4:3
Projection distance	1.95 - 2.87 m
Projection technology	DLP
Contrast ratio (typical)	20000:1
Screen size compatibility	30 - 300 \
Projection distance (tele)	3.33 - 4.85 m
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	+ 30/ ± 30 °
Focus	Manual
Offset	50 %
Digital zoom	2 x
Optical zoom	1.5 x
Zoom capability	Yes
Focal length range	2.31 - 2.73 mm
DVI port	No
Audio (L/R) in	0
Serial interface type	RS-232C
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Maximum digital resolution	1920 x 1080 pixels
Operating temperature (T-T)	5 - 35 °C
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Power source	-
Power consumption (standby)	180 W
Service life of light source	10000 h
Service life of light source (economic mode)	6000 h
Analog signal format system	NTSC, PAL, PAL 60, PAL M, PAL N, SECAM

Weight and Dimensions

Width	299 mm
Height	97 mm
Weight	3500 g