22
To check the power saving level
1.
Press the [ ] key.
This displays a light control dialog box. The current power saving level is indicated by leaf ( )
marks at the top of the dialog box. The more leaf marks there are, the higher the power saving
level.
At this time you can adjust the light output level using the [] and [] keys.
2.
To close the dialog box, press the [ESC] key.
The above operation cannot be performed while “Off” is selected for the “Light Control”
setting on the Setup Menu.
To turn the light sensor control on or off (XJ-F Series only)
1.
Press the [MENU] key to display the Setup Menu.
2.
Use the [] key to select “Option Settings 1”, and then press the [ENTER] key.
3.
Use the [] key to select “Light Control” and then press the [ENTER] key.
This displays a light control dialog box.
4.
Use the [] key to select “Light Sensor” and then press the [] key to select
“On” or the [] key to select “Off”.
5.
Press the [ESC] key to exit the Setup Menu.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
