18
Mains Electricity Connection
Warning! This appliance must be earthed
We recommend that the appliance is connected by a qualified
electrician, who is a member of the N.I.C.E.I.C. and who will comply
with the I.E.T. and local regulations.
This appliance is intended to be
connected to fixed wiring and is not
suitable for connection to a 13A plug
or 13A supply.
This appliance is intended to be
connected to fixed wiring by a
double pole switch, having a contact
separation of at least 3mm in all poles.
The switch must be positioned no
further than 2m from the appliance.
Please note:
• The mains cable must only be
replaced by a qualified electrician
or service engineer and must be of
equivalent or better rating
(i.e. 2.5 mm² HO5RR-F).
• This appliance is intended to be
connected to the mains supply with a
cable of cross section area 2.5 mm
2
.
Fig. 5
To Next Page
Loading...
Need help?
General
