Instruction Manual | 17
Keeping your oven clean and well maintained helps to prolong its life.
It is important that, before any cleaning or maintenance is performed,
you switch o the oven at the mains supply. Do not start any cleaning
or maintenance until the oven has been allowed to cool completely.
Door removal
In order to gain better access to the oven cavity for cleaning, it is
possible to remove the door. To do this, lift the safety catch part of the
hinge upwards (fig. A). Close the door lightly, lift and pull it out towards
you. In order to fit the door back on to the oven, follow the steps in
reverse,
When fitting, ensure that the notch of the hinge is correctly placed on
the hinge holder. After the door is fitted to the oven, the safety catch
should be carefully lowered down again. If the safety catch is not set it
may cause damage to the hinge when closing the door.
Cleaning and maintenance
A
Lifting the hinge safety catches
To Next Page
Loading...
Need help?
General
