8 | Instruction Manual
Control panel
Select the mode of operation
Higher setting sensor
Lower setting sensor
Appliance on indicator
Kitchen timer
Duration
Operation
Operation of the oven is controlled by the oven function knob – to set a
required function you should turn the knob to the selected position, and the
temperature regulator knob – to set a required function you should turn the
knob to the selected position.
The oven can be switched o by setting both of these Controls to the
position “ ”/“ ”.
Caution! When selecting any heating function (switching a heater on etc.)
the oven will only be switched on after the temperature has been set by the
Thermostat Control.
MENU
>
<
o
0
5050
100
150
200
250
To Next Page
Loading...
Need help?
General
