7
• Remove all the packaging materials from the interior of the dishwasher.
• Fill the rinse aid compartment.
• Run a hot programme without any dishes in the dishwasher.
Control panel
Power button (1)
• To switch the dishwasher on or o, press the power button (1).
When you switch on the dishwasher, the end of programme light
will illuminate, and two dashes will appear on the display.
Programme display (2)
The programme display shows the selected programme and the
remaining time to run. If there is a fault on the dishwasher, the fault
code will show on the display.
Programme selection button (3)
• To select a programme, press the programme selection button (3).
The dishwasher will store in its memory the last programme used.
To Next Page
Loading...
Need help?
General
