SAFETY
A-16 79022791 B Rev.
SAFETY SIGNS AND LABELS
There are several specific safety signs on this tractor. The
exact location of the hazards and the description of the
hazards are reviewed in this section.
Please become familiarized with all safety signs. Make
sure that all of the safety signs are legible. Clean the
safety signs or replace the safety signs if you cannot read
the words. Replace the illustrations if the illustrations are
not visible. When you clean the safety signs, use a cloth,
water, and soap. Do not use solvent, gasoline, or other
harsh chemicals to clean the safety signs. Solvents,
gasoline, or harsh chemicals could loosen the adhesive
that secures the safety sign. Loose adhesive will allow the
safety sign to fall.
Replace any safety sign that is damaged or missing. If a
safety sign is attached to a part of the machine that is
replaced, install a safety sign on the replacement part.
Any AGCO dealer can provide new safety signs.
WARNING: DO NOT remove or obscure
Danger, Warning, Caution, or Instruction
Signs.
To Next Page
Loading...
Need help?
General
