How
to
Add
Fluid
Here’s how to add fluid. Refer
to
the Maintenance
Schedule to determine what kind of fluid to use. See
“Recommended Fluids and Lubricants” in the Index.
1.
Remove the filler plug.
2.
Add fluid at the filler plug hole. Add only enough
fluid to bring the fluid level up to the bottom
of
the
filler plug hole.
3.
Install the filler plug. Be sure the plug is fully seated.
Hydraulic
Clutch
The clutch linkage in your vehicle is self-adjusting. The
clutch master cylinder reservoir is filled with hydraulic
clutch fluid.
It isn’t a good idea to “top
off’
your clutch fluid. Adding
fluid won’t correct a leak.
A fluid
loss
in this system could indicate a problem.
Have
the
system inspected and repaired.
When
to
Check
and What to
Use
Refer to the Maintenance Schedule to determine how
often you should check the fluid level in
your
clutch
master cylinder reservoir and for the proper fluid. See
“Owner Checks and Services” and “Recommended
Fluids and Lubricants” in the Index.
6-24
To Next Page
Loading...
Need help?
General
