To
Set
Cruise
Control
To
Resume
a
Set
Speed
1.
Turn
the
cruise control on.
2.
Get up to the speed you want.
3.
Push in the set button
at the end
of
the lever
and release
it.
4.
Take
your foot
off
the accelerator pedal.
Suppose you set your cruise control at a desired speed
and then you apply the brake or clutch pedal.
This,
of
course, shuts off the cruise control. But you don’t need
to reset it.
Once you’re going about
25
mph
(40
km/h)
or more,
you can move the cruise
control switch to IUA
(Resume/Accelerate) for
about half a second.
You’ll go right back up
to
your chosen speed and stay
there.
2-44
To Next Page
Need help?
General
