Bulb
Replacement
For any bulb changing procedure not listed in this
section, contact your dealer.
For the type
of bulbs, see Replacement
Bulbs
on
page
5-58.
Halogen
Bulbs
Halogen bulk,, have pressurized gas inside
and can burst if you drop or scratch the bulb.
You or others could be injured. Be sure to read
and follow the instructions on the bulb
package.
Headlamps
1.
2.
3.
4.
5.
6.
7.
Remove the two bolts from the headlamp assembly.
Remove the two pins on the top of the headlamp
assembly. To remove the pins, turn the outer pin
clockwise and pull it straight up. To remove
the inner pin, turn
it
counterclockwise and pull it
straight up.
Lift the inboard side
of
the headlamp
to
release the
inboard tab from the radiator support.
Lift the outboard side
of
the headlamp
to
release
the outboard tab from the radiator support.
Lower the headlamp to allow the vertical adjustor to
clear tie bar.
Turn the headlamp forward and upward
to
remove
it from the grille.
Turn the bulb connector counterclockwise and pull it
out of the housing.
5-54
To Next Page
Loading...
Need help?
General
