6. Remove the bulb socket by squeezing the tab on
the side of the socket while turning it
counterclockwise.
7. Turn the bulb counterclockwise to remove it.
8. Install a new bulb.
9. Reverse the steps to reinstall the taillamp assembly.
Replacement Bulbs
Exterior Lamp Bulb Number
Back-up, Rear Parking,
Stoplamp, and Turn Signal Lamp
3157
Center High Mounted Stop
Lamp (CHMSL)
912
Front Parking and Turn
Signal Lamp
3157KX
Front Sidemarker Lamp 194
Headlamps
Composite High-Beam
Headlamp
9005
Composite Low-Beam
Headlamp
9006GS
Sealed Beam Headlamp H6054
For replacement bulbs not listed here, contact your
dealer/retailer.
Windshield Wiper Blade
Replacement
Windshield wiper blades should be inspected for wear
and cracking. See Scheduled Maintenance on page 6-4
for more information on wiper blade inspection.
5-54
To Next Page
Loading...
Need help?
General
