EasyManuals Logo

Chevrolet Spark 2022 User Manual

Chevrolet Spark 2022
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #148 background imageLoading...
Page #148 background image
Chevrolet Spark Owner Manual (GMK-Localizing-Israel-15672694) - 2022 -
CRC - 3/17/21
Vehicle Care 147
4. Rotate bulb holder anti-clockwise.
5. Remove bulb holder. Push bulb into
socket slightly, rotate anti-clockwise,
remove and renew bulb.
6. Insert bulb holder into the tail light
assembly and screw into place.
Connect wiring plug. Install tail light
assembly in body and tighten screws.
Close covers and engage.
7. Switch on ignition, operate and check all
lights.
Side Turn Signal Lamps
To replace bulb, remove lamp housing:
1. Slide lamp to the front and remove it
out of the front wing with the rear end.
2. Turn bulb holder anticlockwise and
remove from housing.
3. Pull bulb from bulb holder and replace it.
4. Insert bulb holder and turn clockwise.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Chevrolet Spark 2022 and is the answer not in the manual?

Chevrolet Spark 2022 Specifications

General IconGeneral
BrandChevrolet
ModelSpark 2022
CategoryAutomobile
LanguageEnglish

Related product manuals