Problems
on
the
Road
Storing
the
Jack
and
Tire
Storhg
the
Jack
Put the tools into the storage box and close it tightly, Fit the storage
box
into
the bracket with the bolt through the box. Put the jack onto the
box.
Be sure
the jack points in the right direction as shown for your model. Secure the
emergency gloves,
if
your vehicle has them, to the jack using the provided
strap.
Slide the retainer over the bolt onto the jack and put the wing nut on. Turn
the nut clockwise until it is tight against the retainer.
Replace the jack storage cover,
if
your vehicle has one, by simply reversing
the removal procedure described earlier.
Storing
the
Tire
Be sure the J-bolt
is
hooked properly
for
your
model
or
tire size as shown.
n
I
-
BOLT
J
-
BOLT
,ADAPTER
ADAPTER
NOTE:
Use
lower
hole
for
8
lug
rim
only.
L
PO21
3
If
you have a wagon model, use these locations.
5-30
To Next Page
Loading...
Need help?
General
