Cisco 2500 Series Configuration Guide

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs
721-1001-000-AH.docx
December 2016 15
Cisco 7.0:
Other versions:
17 Click Save Configuration.
Connecting APs
As the APs are connected to the network, they should automatically find the controller via the
CAPWAP discovery algorithms. The Dynamic Host Configuration Protocol (DHCP) server will
assign each AP an IP address.
Admin Tip: DHCP server
You can configure a DHCP server to run on a remote PC for a small deployment.
However, for large-scale deployments, an enterprise-grade DHCP server must be
used.
The ap-manager and management interfaces’ configuration should include the DHCP server
you have configured. Alternately, you can configure the DHCP server internally on the controller

Cisco 2500 Series Specifications

General

Brand	Cisco
Model	2500 Series
Category	Controller
Language	English