Access Services
Procedure
Step 1
Press the Applications button
.
Step 2
Select Services. (Use the Navigation bar and button to scroll and select.)
Step 3
Highlight the service you want to access.
Step 4
Press the Select soft key, or press the Exit soft key to return to the Applications screen.
Adjust the Display Contrast
The default contrast level setting is 50%.
Procedure
Step 1
Press the Applications button
.
Step 2
Select Preferences. (Use the Navigation bar and button to scroll and select.)
Step 3
Select Contrast.
Step 4
To increase contrast, press the up arrow on the Navigation button. To decrease contrast, press the down arrow.
Step 5
Press the Save soft key to set the contrast level, or press the Cancel soft key to exit.
Adjust the Ring Volume
• During a call, press the + or - on the VOLUME button to respectively increase or decrease the volume.
• Press the + or - on the VOLUME button while the handset is in its cradle and the phone is idle.
Answer a Call
Procedure
Step 1
Lift the handset.
Step 2
If you are using a headset, press the Headset button.
Step 3
If you are using the speakerphone, press the Answer soft key or the Speaker button.
Step 4
If necessary, press the line button to select between incoming calls.
Cisco Unified IP Phone 6945 User Guide for Cisco Unified Communications Manager Express Version 8.8 (SCCP)
12 OL-24413-01
Operating Your Phone
Access Services
To Next Page
Loading...
Need help?
General
