Cisco 7905G User Manual

Adjusting the Speaker Volume
6 Basic Phone Features Cisco 7912 Telephone User Guide
620-05600350
Adjusting the Speaker Volume
To adjust the speaker volume, press and release the up or down VOLUME button
while the speaker is in use.
TIP: A horizontal scale displays on the phone to indicate the volume level.
To save the volume setting for future calls, press Save.
NOTE: If you press the Volume button when not using the speaker, you will adjust the
ringer volume.
Adjusting the Ringer Volume
To adjust the ringer volume press and release the up or down VOLUME button
while the phone is on hook to adjust the ringer volume as desired. The ringer
sounds and a horizontal scale displays on the phone to indicate the volume level.
The new setting is saved automatically.
The ringer volume setting is saved until the phone is reset. If you want to save the
ringer volume setting even after the phone resets, do the following:
1. After setting the volume level, press the Menu ( ) button.
2. Use the Navigation button to scroll to Settings.
3. Press Select.
TIP: As a shortcut, press Menu and then 3 on the keypad.
4. If you want the volume to be saved if the phone resets, press Save.
NOTE: If you do not press Save and the phone resets, the volume returns to the default
setting.
5. Press Exit to exit the Setting menu.
Answering Calls
Your Cisco phone allows you to answer calls while the phone is idle or while you
are already in a conversation. It is also easy to switch back and forth between calls.
Answer a Call
When you hear your phone ring and see the red light flash on your handset, pick
up the handset. You will be connected to the calling party.

Cisco 7905G Specifications

General

Brand	Cisco
Model	7905G
Category	IP Phone
Language	English