Cisco 8851 User Manual

CHAPTER 2
Phone Setup
•
Connect Footstand, page 29
•
Adjust the Handset Rest, page 30
•
Secure the Phone with a Cable Lock, page 30
Connect Footstand
The phone includes an adjustable footstand. If the phone is placed on a table or desk, the footstand can be
connected to the back of the phone. The footstand enables the phone angle to be adjusted from a minimum
of 35 degrees to a maximum of 50 degrees to ensure an optimal viewing angle.
Adjusting the footstand to the required angle may require more force than you expect.Note
Procedure
Step 1
Insert the connectors into the slots provided.
Step 2
Press the footstand until the connectors snap into place.
Step 3
Adjust the angle by pressing down or pulling up on the footstand. The connectors are made of a flexible
material.
Cisco IP Phone 8811, 8841, 8845, 8851, 8851NR, 8861, and 8865 User Guide for Cisco Unified Communications Manager
11.0
29

Cisco 8851 Specifications

General

Brand	Cisco
Model	8851
Category	IP Phone
Language	English