Cisco APIC L4 User Manual

Modular LOM (mLOM) card
bay on chassis floor (x16 PCIe
lane)
12PCIe riser slot 111
Figure 7: Three Riser Configuration Serviceable Component Locations
Cisco M6 12G SAS RAID card or Cisco M6 12G
SAS HBA Controller
2Front-loading drive bays 1–10 support
SAS/SATA/NVMe drives.
1
SuperCap module mounting bracket
The SuperCap module (not shown) that mounts into
this location provides RAID write-cache backup.
4Cooling fan modules, eight.
Each fan is hot-swappable
3
Motherboard CPU socket two (CPU2)6DIMM sockets on motherboard, 32 total, 16 per
CPU
CPUs are arranged in groups of eight sockets above
the top CPU and below the bottom CPU, and 16
sockets between the CPUs.
5
M.2 module connector
Supports a boot-optimized RAID controller with
connectors for up to two SATA M.2 SSDs
8Motherboard CPU socket one (CPU1)7
PCIe riser slot 310Power Supply Units (PSUs), two9
Modular LOM (mLOM) card bay on chassis floor
(x16 PCIe lane)
12PCIe riser slot 211
Cisco APIC M4/L4 Server Installation and Service Guide
12
Overview
Serviceable Component Locations

Cisco APIC L4 Specifications

General

Brand	Cisco
Model	APIC L4
Category	Server
Language	English