Cisco APIC L4 User Manual

12 VDCPower supply standby voltage
≥ 92% at 50% loadEfficiency rating
RSP2Form factor
Fixed 3-wire blockInput connector
Power Cord Specifications
Each power supply in the server has a power cord. Standard power cords or jumper power cords are available
for connection to the server. The shorter jumper power cords, for use in racks, are available as an optional
alternative to the standard power cords.
Only the approved power cords or jumper power cords listed below are supported.
Note
Table 11: Supported Power Cords
Length (Meters)Length (Feet)Description
3.511.7CAB-48DC-40A-8AWG
DC power cord, -48 VDC, 40 A, 8 AWG
Three-socket Mini-Fit connector to three-wire
3.09.8CAB-C13-C14-AC
AC power cord, 10 A; C13 to C14, recessed receptacle
2.58.2CAB-250V-10A-AR
AC power cord, 250 V, 10 A
Argentina
2.06.6CAB-C13-C14-2M-JP
AC Power Cord, C13 to C14
Japan PSE Mark
2.58.2CAB-9K10A-EU
AC Power Cord, 250 V, 10 A; CEE 7/7 Plug
Europe
2.58.2CAB-250V-10A-IS
AC Power Cord, 250 V, 10 A
Israel
Cisco APIC M4/L4 Server Installation and Service Guide
40
Server Specifications
Power Cord Specifications

Cisco APIC L4 Specifications

General

Brand	Cisco
Model	APIC L4
Category	Server
Language	English