Cisco APIC L4 User Manual

DescriptionFeature
Eight hot-swappable fan modules for front-to-rear cooling.Cooling
Horizontal PCIe expansion slots are supported by PCIe riser
assemblies. The server supports either of the following
configurations:
• One half-height riser card in PCIe Riser 1
• Three half-height riser cards in PCIe Riser 1, 2, 3
• Two full-height riser cards
PCIe I/O
The PCIe bus slots in this server support the InfiniBand
architecture.
InfiniBand
Three half-height riser slots
• Riser 1 (controlled by CPU 1): One x16 PCIe Gen4 Slot,
(Cisco VIC), half-height, 3/4 length
• Riser 2 (controlled by CPU 1): One x16 PCIe Gen4 Slot,
electrical x8, half-height, 3/4 length
• Riser 3 (controlled by CPU 1): One x16 PCIe Gen4 Slot,
(Cisco VIC), half-height, 3/4 length
Two full-height riser slots
• Riser 1 (controlled by CPU 1): One x16 PCIe Gen4 Slot,
(Cisco VIC), full-height, 3/4 length
• Riser 3 (controlled by CPU 1): One x16 PCIe Gen4 Slot,
(Cisco VIC), full-height, 3/4 length
Expansion Slots
Rear panel:
• One 1Gbase-T RJ-45 management port
• One RS-232 serial port (RJ45 connector)
• One DB15 VGA connector
• Two USB 3.0 port connectors
• One flexible modular LAN on motherboard (mLOM) slot
that can accommodate various interface cards
Front panel:
• One KVM console connector (supplies two USB 2.0
connectors, one
• VGA DB15 video connector, and one serial port (RS232)
RJ45 connector)
Interfaces
Cisco APIC M4/L4 Server Installation and Service Guide
15
Overview
Summary of Server Features

Cisco APIC L4 Specifications

General

Brand	Cisco
Model	APIC L4
Category	Server
Language	English