Cisco APIC L4 User Manual

DescriptionFeature
Rear panel:
• One 1-Gb Ethernet dedicated management port (RJ-45
connector)
• One RS-232 serial port (RJ-45 connector)
• One VGA video connector port (DB-15 connector)
• Two USB 3.0 ports
• One flexible modular LAN on motherboard (mLOM)/OCP
3.0 slot that can accommodate various interface cards
• One KVM console connector (supplies two USB 2.0
connectors, one VGA DB15 video connector, and one serial
port (RS232) RJ45 connector)
Front panel:
• One KVM console connector (supplies two USB 2.0
connectors, one VGA DB15 video connector, and one serial
port (RS232) RJ45 connector)
Network and management I/O
The dedicated mLOM/OCP 3.0 slot on the motherboard can
flexibly accommodate the following cards:
• Cisco Virtual Interface Cards
• OCP 3.0 network interface card (UCSC-O-ID10GC)
Modular LAN on Motherboard (mLOM)/ OCP3 3.0 slot
The two 1-Gb/10-Gb BASE-T Ethernet LAN ports support the
wake-on-LAN (WoL) standard.
WoL
Up to two of the following hot-swappable power supplies:
• 770 W (AC)
• 1050 W (AC)
• 1050 W (DC)
• 1600 W (AC)
• 2300 W (AC)
One power supply is mandatory; one more can be added for 1 +
1 redundancy.
Power
The advanced configuration and power interface (ACPI) 4.0
standard is supported.
ACPI
The front panel controller provides status indications and control
buttons
Front Panel
Cisco APIC M4/L4 Server Installation and Service Guide
14
Overview
Summary of Server Features

Cisco APIC L4 Specifications

General

Brand	Cisco
Model	APIC L4
Category	Server
Language	English