Cisco APIC L4 User Manual

Table 5: Physical Specifications
SpecificationDescription
10° C to 35° C (50° F to 95° F) with no direct sunlight
Derate the maximum temperature by 1°C per every 300 meters of altitude above
sea level.
Although the ASHRAE guidelines define multiple classes with different
operating ranges, the recommended temperature and humidity operating
range is the same for each class. The recommended temperature and
humidity ranges are:
Note
• Operating Temperature: 64.4°F to 80.6°F (18°C to 27°C)
For general information, see the Cisco Unified Computing System Site
Planning Guide: Data Center Power and Cooling.
Temperature, Operating
Below -40° C or above 65° C (below -40° F or above 149° F)
Maximum rate of change (operating and non-operating) 20° C/hr (36° F/hr)
Temperature, non-operating
(when the server is stored or transported)
5° C to 40° C (41° F to 104° F) with no direct sunlight
Maximum allowable operating temperature derated
1° C/175 m (1° F/319 ft) above 950 m (3117 ft)
5° C to 45° C (41° F to 113° F) with no direct sunlight
Maximum allowable operating temperature derated
1° C/125 m (1° F/228 ft) above 950 m (3117 ft)
System performance may be impacted when operating in the
extended operating temperature range.
Operation above 40° C is limited to less than 1% of annual
operating hours.
Hardware configuration limits apply to extended operating temperature range.
Extended Operating Temperature
8 to 90% and 24° C (75o F) maximum dew-point temperature, non-condensing
environment
Humidity (RH), operating
Below 5% or above 95% and 33o C (91o F) maximum dew-point temperature,
non-condensing environment
Humidity (RH), non-operating
(when the server is stored or transported)
0 to 10,000 feetAltitude, operating
0 to 40,000 feetAltitude, non-operating
(when the server is stored or transported)
Cisco APIC M4/L4 Server Installation and Service Guide
36
Server Specifications
Server Specifications

Cisco APIC L4 Specifications

General

Brand	Cisco
Model	APIC L4
Category	Server
Language	English