Cisco ASR 1001 User Manual

Page 10 of 72
Component
Required
Usage/Purpose Description for TOE performance
NTP Server
No
The TOE supports communications with an NTP server in order to synchronize
the date and time on the TOE with the NTP server’s date and time. A solution
must be used that supports secure communications with up to a 32 character key.
Audit (syslog)
Server
Yes
This includes any syslog server to which the TOE would transmit syslog
messages.
Another
instance of the
TOE
No
Includes “another instance of the TOE” that would be installed in the evaluated
configuration, and likely administered by the same personnel. Used as a VPN
peer.
1.6 Excluded Functionality
Table 4: Excluded Functionality
Excluded Functionality
Exclusion Rationale
Non-FIPS 140-2 mode of operation on the
router.
This mode of operation includes non-FIPS
allowed operations.
These services will be disabled by configuration. The exclusion of this functionality does not
affect compliance to the U.S. Government Protection Profile for Security Requirements for
Network Devices.

Cisco ASR 1001 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
USB ports quantity	1
Ethernet LAN (RJ-45) ports	4
VPN tunnels quantity	8000
Product color	Gray
Rack capacity	1U
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	250 W
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	8192 MB
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	11350 g