EasyManuals Logo
Home>Cisco>Network Router>ASR 1001

Cisco ASR 1001 User Manual

Cisco ASR 1001
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
Page 42 of 72
The ‘discard’ option is accomplished using access lists with deny entries, which are
applied to interfaces within access-groups. Guidance for configuration of IOS
Information Flow Policies is located in the [23] Under “IP Access List Overview
The ‘bypassing’ option is accomplished using access lists with deny entries, which
are applied to interfaces within crypto maps for IPsec. Guidance for configuration of
entries for IPsec is in [10]
The ‘protecting’ option is accomplished using access lists with permit entries, which
are applied to interfaces within crypto maps for IPsec VPN.
The criteria used in matching traffic in all of these access lists includes the source and destination
address, and optionally the Layer 4 protocol and port.
The TOE enforces information flow policies on network packets that are receive by TOE
interfaces and leave the TOE through other TOE interfaces. When network packets are received
on a TOE interface, the TOE verifies whether the network traffic is allowed or not and performs
one of the following actions, pass/not pass information, as well as optional logging.
4.6.6 IPsec Session Interuption/Recovery
If an IPsec session with a peer is unexpectedly interrupted, the connection will be broken. In
these cases, no administrative interaction is required. The IPsec session will be reestablished (a
new SA set up) once the peer is back online.

Table of Contents

Other manuals for Cisco ASR 1001

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1001 and is the answer not in the manual?

Cisco ASR 1001 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standards-
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
USB ports quantity1
Ethernet LAN (RJ-45) ports4
VPN tunnels quantity8000
Product colorGray
Rack capacity1U
AC input voltage85 - 264 V
Power source typeAC
AC input frequency50 - 60 Hz
Power consumption (typical)250 W
SafetyUL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
CertificationFCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory8192 MB
Operating altitude0 - 3048 m
Storage temperature (T-T)0 - 50 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)5 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth461.5 mm
Width439.42 mm
Height43.43 mm
Weight11350 g

Related product manuals