EasyManuals Logo
Home>Cisco>Network Router>ASR 900 Series

Cisco ASR 900 Series Release Notes

Cisco ASR 900 Series
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #176 background imageLoading...
Page #176 background image
24
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-12
Chapter
Caveats in Cisco IOS XE 3.8S Releases
• CSCua95873
Symptoms: The router continues passing traffic on the OC-3 interface after you shut down the
controller.
Conditions: Occurs when you shut down the OC-3 controller; the router momentarily continues to
increment interface counters.
Workaround: There is no workaround.
• CSCub73405
Symptom: Cisco ASR903 router can experience latency for process-switched traffic and display
high CPU utilization at nile_mgr.
Conditions: Occurs on an ASR 903 with redundant RSPs after you reload the standby RSP.
Workaround: Reboot the router.
• CSCub78861
Symptom: Following a reload, the router handles CFM only on 128 VLANs or bridge-domains.
Conditions: Occurs when the router configuration contains CFM and more than 128 VLANs or
bridge-domains.
Workaround: There is no workaround.
• CSCub79869
Symptom: BGP PIC edge convergence time is high.
Conditions: Occurs in a 3-label stack setup using LDP, BGP, and VPN labels.
Workaround: There is no workaround for a stack using 3 labels. However, the issue does not occur
when you use 2 labels.
• CSCub98691
Symptom: The router displays an I2C write fail error message.
Conditions: The issue can occur when the router is idle or when the router is loaded and passing
traffic.
Workaround: There is no workaround. However, the issue does not have any functional impact.
• CSCuc01154
Symptom: The router does not report B1, B2, and B3 alarms at normal thresholds.
Conditions: Occurs on the OC-3 interface module when the router sends errored frames.
Workaround: There is no workaround.
• CSCuc41763
Symptom: The router displays a RUNHOG traceback error message.
Conditions: Occurs when you reload the router or an interface module.
Workaround: There is no workaround.
• CSCuc51051
Symptom: Remote LFA FRR convergence takes more than 50 milliseconds.
Conditions: Occurs after you reload the router.
Workaround: Reset the interface on the primary path.

Table of Contents

Other manuals for Cisco ASR 900 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 900 Series and is the answer not in the manual?

Cisco ASR 900 Series Specifications

General IconGeneral
BrandCisco
ModelASR 900 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals