Cisco ASR 900 Series Release Notes

3
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-12
Chapter
New Software Features in Cisco IOS XE Release 3.10.2S
• EEE 1613 2009—IEEE Standard for Environmental and Testing Requirements for Communications
Networking Devices in Electric Power Substations
• EC 61850-3—IEC standard specifying general requirements for substation automation systems
(SAS) communications and related system requirements.
• EC 60870-2-1:1995—IEC standard for substation environmental conditions
• EC 60870-2-2:1996—IEC standard for substation environmental conditions
• EC 61000-6-5:2001—IEC standard defining immunity for power station and substation
environments
For information on how to install the serial interface module, see the Cisco ASR 903 Hardware
Installation Guide.
For information on how to configure the serial interface module, see Configuring Raw Socket Transport
on the Cisco ASR 903 Router.
Note We recommend the installation of the Metro IP Services and Metro Aggregation Services licenses with
serial interface module. For more information about obtaining and installing licenses, see Software
Licensing Overview.
CWDM SFP
Cisco IOS XE Release 3.10S introduces support for the following SFPs on the 10 Gigabit Ethernet XFP
Interface Module:
• ONS-XC-10G-EP
• ONS-XC-10G-1470
• ONS-XC-10G-1490
• ONS-XC-10G-1510
• ONS-XC-10G-1530
• ONS-XC-10G-1550
• ONS-XC-10G-1570
• ONS-XC-10G-1590
• ONS-XC-10G-1610
For more information about how to configure these SFPs, see:
http://www.cisco.com/en/US/partner/docs/interfaces_modules/transceiver_modules/installation/note/O
L_24246.html
http://www.cisco.com/en/US/partner/products/hw/modules/ps5455/tsd_products_support_series_home
.html
New Software Features in Cisco IOS XE Release 3.10.2S
There are no new software features introduced for Cisco IOS XE Release 3.10.2.S.

Cisco ASR 900 Series Specifications

General

Brand	Cisco
Model	ASR 900 Series
Category	Network Router
Language	English