Cisco ASR 903 Release Notes

14
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-08
Chapter
Caveats in Cisco IOS XE 3.10S Releases
Workaround: There is no workaround.
• CSCud09813
Symptom: Timestamping does not work in CFM over cross-connected MEP with port channel.
Conditions: This issue is observed when you configure CFM over cross-connected MEP with port
channel from a Cisco ASR 903 router to a Cisco ME 3600 switch.
Workaround: There is no workaround.
• CSCud12624
Symptom: Traceback is displayed when you configure the ACR group.
Conditions: This issue is observed when you configure an ACR group.
Workaround: There is no workaround.
• CSCud29491
Symptom: A two-level policy with match EFP in parent and PHB-based policy in child can be
applied.
Conditions: This issue is observed when you apply a policy on a physical interface having EFPs on
that physical interface.
Workaround: There is no workaround. This configuration is not supported.
• CSCud34630
Symptom: The following error message is displayed on the standby machine while using the
shutdown and no shutdown commands on the ACR controller:
NETWORK_RF_API-3-FAILDECODEDATADESC
Conditions: This issue is observed on the standby machine when you configure ACR interface.
Workaround: There is no workaround.
• CSCud35689
Symptoms: The router accepts a queue-limit configuration at the parent level of a policy or at the
vlan class or port level.
Conditions: This issue is observed when you add a queue-limit configuration on a policy at the
parent level or at the vlan class or at port level.
Workaround: There is no workaround. This configuration is not supported.
• CSCud35732
Symptom: The router does not apply egress CFM MIP filtering.
Conditions: This issue is observed when you overwrite a MIP configuration using the ethernet CFM
MIP level command.
Workaround: Instead of overwriting the MIP level configuration, remove and reapply the
configuration.
• CSCud38038
Symptom: The router records incorrect delay measurements after a reload.
Conditions: This issue is observed under the following conditions:
– You configure Delay Measurement Message (DMM) on a port-channel interface.
– The port-channel member links are on different interface modules (IMs).
– You reload the router.

Cisco ASR 903 Specifications

General

Brand	Cisco
Model	ASR 903
Category	Network Router
Language	English