PurposeCommand or Action
efd notify {g8032|rep}
Step 7
• g8032—Enables G.8032 notifications on the MA.
Example:
Router(config)# efd notify rep
• rep—Enables REP notifications on the MA.
.
Either g8032 or rep notifications can be configured
for an MA at an instance. For example, if REP
notifications are enabled while G.8032 notifications
are enabled for an MA, the G.8032 notifications are
disabled.
Note
Returns to privileged EXEC mode.end
Example:
Router# end
Step 8
Configuration Examples
Example: Configuring REP AG EFD
The example shows EFD notify enabled on the router.
ethernet cfm ieee
ethernet cfm global
ethernet cfm traceroute cache
ethernet cfm traceroute cache hold-time 60
ethernet cfm domain d1 level 6
service s1 port
continuity-check
continuity-check interval 100ms
efd notify rep
end
..
1
interface GigabitEthernet0/1/2
ethernet cfm mep domain d1 mpid 3 service s1
service instance trunk 1 ethernet
encapsulation dot1q 209-212
rewrite ingress tag pop 1 symmetric
bridge-domain from-encapsulation
end
..
!
interface GigabitEthernet0/1/3
ethernet cfm mep domain d1 mpid 4 service s1
service instance trunk 1 ethernet
encapsulation dot1q 209-212
rewrite ingress tag pop 1 symmetric
bridge-domain from-encapsulation
LAN Switching Configuration Guide Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
5
REP Access Gateway
Configuration Examples