Configuring Call Home
Message Contents
42
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Message Contents
The following tables display the content formats of alert group messages:
• Table 4 describes the content fields of a short text message.
• Table 5 describes the content fields that are common to all long text and XML messages. The fields
specific to a particular alert group mess
age are inserted at a point between the common fields. The
insertion point is identified in the table.
• Table 6 describes the inserted content fields for reactive messages (system failures that require a
TAC case) and proactive messages (issues that might re
sult in degraded system performance).
• Table 7 describes the inserted content fields for an inventory message.
This section also includes the following subsections that provide sample messages:
• Sample Syslog Alert Notification in Long Text Format, page 46
• Sample Syslog Alert Notification in XML Format, page 50
— PEM /FM
HA
RDWARE_
REMOVAL
%ASR1000_PEM-6-REMPEM_FM 6 PEM/FM slot (slot number)
removed.
— PEM /FM
HA
RDWARE_I
NSERTION
%ASR1000_PEM-6-INSPEM_FM 6 PEM/FM slot (slot number)
inserted.
Syslog — — — Event logged to syslog.
CLI commands executed:
show inventory
show logging
— SYSLOG LOG_EMERG 0 System is unusable.
— SYSLOG LOG_ALERT 1 Action must be taken immediately.
— SYSLOG LOG_CRIT 2 Critical conditions.
— SYSLOG LOG_ERR 3 Error conditions.
— SYSLOG LOG_WARNING 4 Warning conditions.
— SYSLOG LOG_NOTICE 5 Normal but signification condition.
— SYSLOG LOG_INFO 6 Informational.
— SYSLOG LOG_DEBUG 7 Debug-level messages.
Test — TEST — User-generated test message. (Sent
to
TAC.)
CLI commands executed:
show platform
show inventory
show version
Table 3 Call Home Alert Groups, Events, and Actions (continued)
Alert Group
Call Home
Trigger Event Syslog Event Severity
Description and CLI Commands
Executed
To Next Page
Loading...
Need help?
General
