Cisco C1111 8P Series User Manual

Install an LTE Pluggable Module
To reduce the risk of electric shock, the chassis of this equipment needs to be connected to permanent earth
ground during normal use Statement 445
Warning
Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages
and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other
equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all
cards, faceplates, front covers, and rear covers are in place. Statement 1029.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement
1030.
Warning
Pluggable optical modules comply with IEC 60825-1 Ed. 3 and 21 CFR 1040.10 and 1040.11 with or without
exception for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice No. 56, dated May 8, 2019.
Statement 1255.
Warning
LTE Pluggable TechnologyLTE Pluggables
3.0 LTEEA (CAT6)P-LTEA-EA
3.0 LTELA (CAT6)P-LTEA-LA
Pro (CAT18)P-LTEAP18-G
System and spare CAT4 LTE PluggableP-LTE-VZ
System and spare CAT4 LTE PluggableP-LTE-US
System and spare CAT4 LTE PluggableP-LTE-GB
WP7605-GP-LTE-JN
LTE CAT4
WP7608-GP-LTE-IN
LTE CAT4
WP7610-GP-LTE-MNA
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
64
Install and Upgrade Internal Modules and Field Replaceable Units
Install an LTE Pluggable Module

Cisco C1111 8P Series Specifications

General

Brand	Cisco
Model	C1111 8P Series
Category	Network Router
Language	English