Cisco C9300L-48P-4X User Manual

Identifying a Crossover Cable
To identify a crossover cable, compare the two modular ends of the cable. Hold the cable ends side-by-side,
with the tab at the back. The wire connected to the pin on the outside of the left plug should be a different
color from the wire connected to the pin on the inside of the right plug.
Figure 78: Identifying a Crossover Cable
Console Port Adapter Pinouts
The RS-232 console port uses an 8-pin RJ-45 connector. Use an RJ-45-to-DB-9 adapter cable to connect the
switch console port to a console PC. You need to provide a RJ-45-to-DB-25 female DTE adapter to connect
the switch console port to a terminal.
Table 52: Console Port Signaling with a DB-9 Adapter
Console
Device
RJ-45-to-DB-9
Terminal Adapter
Switch Console
Port (DTE)
SignalDB-9 PinSignal
RxD2TxD
GND5GND
GND5GND
TxD3RxD
Table 53: Console Port Signaling with a DB-25 Adapter
Console
Device
RJ-45-to-DB-25
Terminal Adapter
Switch Console
Port (DTE)
SignalDB-25 PinSignal
RxD3TxD
GND7GND
GND7GND
TxD2RxD
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
127
Connector and Cable Specifications
Console Port Adapter Pinouts

Cisco C9300L-48P-4X Specifications

General

Brand	Cisco
Model	C9300L-48P-4X
Category	Switch
Language	English