Cisco Catalyst 9124AX Series User Manual

CHAPTER 2
Hardware Features
This section describes the following hardware features of the C9124AXI-x, C9124AXD-x, and C9124AXE-x
models:
• Access Point Views, Ports, and Connectors, on page 7
• C9124AXI (Internal Antenna) Model: Antenna Radiation Patterns, on page 11
• C9124AXD (Directional Antenna) Model: Antenna Radiation Patterns, on page 14
• C9124AXE (External Antenna) Model: Antenna Radiation Patterns, on page 17
• Supported External Antennas, on page 23
• Power Sources, on page 26
Access Point Views, Ports, and Connectors
Cisco Catalyst 9124AX Series Outdoor AP has multiple options that you can use to power the AP or join the
AP to the controller. For information about connectors and ports for the AP models, see Connectors and Ports
on the AP, on page 7.
The illustrations in this document show all the available connections for the AP. The connector plugs seal the
unused connection ports to ensure that the AP is watertight. Liquid-tight adapters are provided for connector
openings. You can install the adapters before or after deploying the AP.
Note
Connectors and Ports on the AP
The following illustrations show the different connector and port options available on the base and sides of
the AP.
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
7

Cisco Catalyst 9124AX Series Specifications

General

Brand	Cisco
Model	Catalyst 9124AX Series
Category	Wireless Access Point
Language	English