Procedure
Step 1
Choose the sleeve size of the power cord retainer based on the thickness of the cord. The smaller sleeve can
be snapped off and used for thin cords.
Step 2
Slide the retainer around the AC power cord, and pass it around the loop on the switch.
Figure 49: Inserting the Retainer through the Lanced Loop (5RU 19" Rack Mount Chassis)
Figure 50: Inserting the Retainer through the Lanced Loop (Flexible mount with IEC C14 power junction box)
Sleeve for thinner power cords3AC power cord1
Loop4Power cord retainer2
Catalyst Digital Building Series Switch Hardware Installation Guide
76
Switch Installation
Installing the Power Cord Retainer
To Next Page
Loading...
Need help?
General