Cisco CW9166D1-ROW User Manual

Table 4: Brackets and Clips to Mount the AP
DescriptionPart NumberMounting Type
Articulating wall or pole mount kit. This kit should be
used along with AIR-AP-BRACKET-2
CW-MNT-ART2-00Brackets
123
Low-profile bracket: Used for ceiling-mount
installations.
AIR-AP-BRACKET-1
Universal bracket: Used for wall or electrical box
installations.
AIR-AP-BRACKET-2
Ceiling grid clip (recessed mounting). (This is the
default option.)
AIR-AP-T-RAIL-RClips
Ceiling grid clip (flush mounting).AIR-AP-T-RAIL-F
Optional adapter for channel-rail ceiling grid profile.AIR-CHNL-ADAPTER
1
Mount the AP using no less than four screw holes on a bracket.
2
AIR-AP-BRACKET-3 is not compatible for use with Cisco CW9166D1 access points.
3
You can also use the in-tile mounting options available from third parties. For more information, see
the access point data sheet.
When mounting the AP in areas where there is a possibility of the AP being knocked off the mounting bracket,
use the lock hasp at the back of the AP to lock it to the bracket.
Cisco Catalyst Wireless 9166D1 Wi-Fi 6E Access Point Hardware Installation Guide
21
Installation Overview
Mounting the Access Point

Cisco CW9166D1-ROW Specifications

General

Brand	Cisco
Model	CW9166D1-ROW
Category	Wireless Access Point
Language	English