Cisco Firepower 1010 Series User Manual

Statement 1028—More Than One Power Supply
This unit might have more than one power supply connection. To reduce risk of electric shock, remove all
connections to de-energize the unit.
Warning
Statement 1029—Blank Faceplates and Cover Panels
Blank faceplates and cover panels serve three important functions: they reduce the risk of electric shock and
fire, they contain electromagnetic interference (EMI) that might disrupt other equipment, and they direct the
flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers,
and rear covers are in place.
Warning
Statement 1030—Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1074—Comply with Local and National Electrical Codes
To reduce risk of electric shock or fire, installation of the equipment must comply with local and national
electrical codes.
Warning
Statement 9001—Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Position the Chassis
See Desktop-Mount the Chassis, on page 32 for information on desktop-mounting the chassis.
Cisco Firepower 1010 Series Hardware Installation Guide
25
Installation Preparation
Position the Chassis

Cisco Firepower 1010 Series Specifications

General

Brand	Cisco
Model	Firepower 1010 Series
Category	Network Hardware
Language	English