Cisco Firepower 1010 Series User Manual

CHAPTER 1
Overview
• Features, on page 1
• Package Contents, on page 8
• QR Code Sticker, on page 8
• Serial Number and Digital Documentation Portal QR Code, on page 9
• Front Panel, on page 10
• Rear Panel, on page 10
• Status LEDs, on page 11
• Hardware Specifications, on page 14
• Product ID Numbers, on page 15
• Power Cord Specifications, on page 16
Features
The Cisco Firepower 1010 and 1010E are a series of compact network security appliances in the Cisco
Firepower family. The Firepower 1010 is first supported in Firepower Threat Defense (FTD) Version 6.4 and
ASA Version 9.12. PoE+ and L2 switch support were added beginning with FTD Version 6.5 and ASA
Version 9.13. The 1010E without PoE+ is supported first in Secure Firewall Threat Defense Version 7.2.3
and Secure Firewall ASA Version 9.18.2.
See the Cisco Firepower Compatibility Guide, which provides Cisco Firepower software and hardware
compatibility, including operating system and hosting environment requirements, for each supported Firepower
version.
The following figure shows the Cisco Firepower 1010 and 1010E.
Figure 1: Cisco Firepower 1010 and 1010E
Cisco Firepower 1010 Series Hardware Installation Guide
1

Cisco Firepower 1010 Series Specifications

General

Brand	Cisco
Model	Firepower 1010 Series
Category	Network Hardware
Language	English