Cisco IE 3000 Series User Manual

B-8
Cisco IE 3000 Switch Hardware Installation Guide
OL-13017-01
Appendix B Installation In a Hazardous Environment
Adding Modules to the Switch
For multimode (MM) connections, you can connect a 100BASE-FX port to a port on a target device by
using an dual-LC connector.
Adding Modules to the Switch
The Cisco IE-3000-4TC or the Cisco IE-3000-8TC switch can operate as standalone devices with four
or eight Fast Ethernet ports, respectively. To increase the number of Fast Ethernet ports by 8 or 16, you
can connect the Cisco IEM-3000-8TM and the Cisco IEM-3000-8FM expansion modules. Depending on
the mix of switches and expansion modules, you can have up to 24 Fast Ethernet ports.
Note The expansion modules cannot operate as standalone devices.

Cisco IE 3000 Series Specifications

General

Brand	Cisco
Model	IE 3000 Series
Category	Switch
Language	English